当前位置：首页 > news >正文

＜OS 有关＞Ubuntu 24 安装 openssh-server, tailscale+ssh 慢增加

news 来源：原创 2025/6/8 14:44:12

更新日志：

Created on 14Jan.2025 by Dave , added openssh-server, tailescape
Updated on 15Jan.2025, added "tailescape - tailscape ssh"

前期准备：

1. 更新可用软件包的数据库

2. 升级系统中所有已安装的软件包到最新版本

3. 安装 curl 和 git 这两个软件包 (如果已经安装，会进行升级)

一、安装 openssh-server（服务器）

1. 安装软件包

sudo apt update
sudo apt install openssh-server

2. 启动 SSH 服务器

启动服务：

sudo systemctl start ssh

查看状态：

root@ub2:~# sudo systemctl status ssh
● ssh.service - OpenBSD Secure Shell serverLoaded: loaded (/usr/lib/systemd/system/ssh.service; enabled; preset: enabled)Active: active (running) since Tue 2025-01-14 20:11:43 CST; 17min ago
TriggeredBy: ● ssh.socketDocs: man:sshd(8)man:sshd_config(5)Process: 954 ExecStartPre=/usr/sbin/sshd -t (code=exited, status=0/SUCCESS)Main PID: 965 (sshd)Tasks: 1 (limit: 4558)Memory: 3.2M (peak: 19.8M)CPU: 191msCGroup: /system.slice/ssh.service└─965 "sshd: /usr/sbin/sshd -D [listener] 0 of 10-100 startups"Jan 14 20:11:43 ub2 systemd[1]: Starting ssh.service - OpenBSD Secure Shell server...
Jan 14 20:11:43 ub2 sshd[965]: Server listening on :: port 22.
Jan 14 20:11:43 ub2 systemd[1]: Started ssh.service - OpenBSD Secure Shell server.
Jan 14 20:13:08 ub2 sshd[1851]: Accepted password for root from 192.168.19.1 port 44083 ssh2
Jan 14 20:13:08 ub2 sshd[1851]: pam_unix(sshd:session): session opened for user root(uid=0) by root(uid=0)

确保 SSH 服务在系统启动时自动启动：

root@ub2:~# sudo systemctl enable ssh
Synchronizing state of ssh.service with SysV service script with /usr/lib/systemd/systemd-sysv-install.
Executing: /usr/lib/systemd/systemd-sysv-install enable ssh
root@ub2:~#

3. 配置防火墙 (UFW)

我用的是 Desktop 版本，ufw 没有启用（安装）。因此，只列出命令。

检查 UFW 的状态：

sudo ufw status

允许 SSH 连接或 22端口：

sudo ufw allow ssh

sudo ufw allow 22

启用 UFW：

sudo vi /etc/ssh/sshd_config

4. 配置 SSH

让 root 用户，使用密码登录。配置文件：/etc/ssh/sshd_config

主要是这两个参数：

PermitRootLogin yes
PasswordAuthentication yes

我正在用的文件：/etc/ssh/sshd_config

root@ub2:~# cat /etc/ssh/sshd_config# This is the sshd server system-wide configuration file.  See
# sshd_config(5) for more information.# This sshd was compiled with PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games# The strategy used for options in the default sshd_config shipped with
# OpenSSH is to specify options with their default value where
# possible, but leave them commented.  Uncommented options override the
# default value.Include /etc/ssh/sshd_config.d/*.conf#Port 22
#AddressFamily any
#ListenAddress 0.0.0.0
#ListenAddress ::#HostKey /etc/ssh/ssh_host_rsa_key
#HostKey /etc/ssh/ssh_host_ecdsa_key
#HostKey /etc/ssh/ssh_host_ed25519_key# Ciphers and keying
#RekeyLimit default none# Logging
#SyslogFacility AUTH
#LogLevel INFO# Authentication:#LoginGraceTime 2m
#PermitRootLogin prohibit-password
PermitRootLogin yes
#StrictModes yes
#MaxAuthTries 6
#MaxSessions 10#PubkeyAuthentication yes# Expect .ssh/authorized_keys2 to be disregarded by default in future.
#AuthorizedKeysFile     .ssh/authorized_keys .ssh/authorized_keys2#AuthorizedPrincipalsFile none#AuthorizedKeysCommand none
#AuthorizedKeysCommandUser nobody# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
#HostbasedAuthentication no
# Change to yes if you don't trust ~/.ssh/known_hosts for
# HostbasedAuthentication
#IgnoreUserKnownHosts no
# Don't read the user's ~/.rhosts and ~/.shosts files
#IgnoreRhosts yes# To disable tunneled clear text passwords, change to no here!
PasswordAuthentication yes
#PermitEmptyPasswords no# Change to yes to enable challenge-response passwords (beware issues with
# some PAM modules and threads)
KbdInteractiveAuthentication no# Kerberos options
#KerberosAuthentication no
#KerberosOrLocalPasswd yes
#KerberosTicketCleanup yes
#KerberosGetAFSToken no# GSSAPI options
#GSSAPIAuthentication no
#GSSAPICleanupCredentials yes
#GSSAPIStrictAcceptorCheck yes
#GSSAPIKeyExchange no# Set this to 'yes' to enable PAM authentication, account processing,
# and session processing. If this is enabled, PAM authentication will
# be allowed through the KbdInteractiveAuthentication and
# PasswordAuthentication.  Depending on your PAM configuration,
# PAM authentication via KbdInteractiveAuthentication may bypass
# the setting of "PermitRootLogin prohibit-password".
# If you just want the PAM account and session checks to run without
# PAM authentication, then enable this but set PasswordAuthentication
# and KbdInteractiveAuthentication to 'no'.
UsePAM yes#AllowAgentForwarding yes
#AllowTcpForwarding yes
#GatewayPorts no
X11Forwarding yes
#X11DisplayOffset 10
#X11UseLocalhost yes
#PermitTTY yes
PrintMotd no
#PrintLastLog yes
#TCPKeepAlive yes
#PermitUserEnvironment no
#Compression delayed
#ClientAliveInterval 0
#ClientAliveCountMax 3
#UseDNS no
#PidFile /run/sshd.pid
#MaxStartups 10:30:100
#PermitTunnel no
#ChrootDirectory none
#VersionAddendum none# no default banner path
#Banner none# Allow client to pass locale environment variables
AcceptEnv LANG LC_*# override default of no subsystems
Subsystem       sftp    /usr/lib/openssh/sftp-server# Example of overriding settings on a per-user basis
#Match User anoncvs
#       X11Forwarding no
#       AllowTcpForwarding no
#       PermitTTY no
#       ForceCommand cvs server
root@ub2:~#

二、安装 Tailscale 应用

1. 安装软件包

curl -fsSL https://tailscale.com/install.sh | sh

2. 启动 tailscale 应用

tailscale up

3. 按照提示激活连接（略）

4. 在控制台确认连接

控制台： （当前是离线）

5. 配置 Tailscale SSH

参考源链接：Tailscale SSH · Tailscale Docs

a. tailscape ssh 用途

在 tailscale console 上，用 SSH 连接主机，见上图红框。

b. 配置 tailscape ssh

配置主要有两处: tailscale console 上的 access controls (见上图绿框)，还有主机上启用 ssh

1) access controls 配置

下面是我的配置内容，你需要替换 “//使用你的tailscale注册邮箱(https://login.tailscale.com/admin/users 里面的邮箱地址)” 为管理员组的 email ，要保留双引号。

{"groups": {"group:admin": ["//使用你的tailscale注册邮箱(https://login.tailscale.com/admin/users 里面的邮箱地址)"],},"tagOwners": {"tag:linux":   ["group:admin"],"tag:windows": ["group:admin"],},"acls": [// 允许管理员访问所有设备的所有端口{"action": "accept", "src": ["group:admin"], "dst": ["*:*"]},// 允许 Linux 设备间互相 SSH 访问{"action": "accept", "src": ["tag:linux"], "dst": ["tag:linux:22"]},// 允许 Windows 设备访问 Linux 设备的 SSH{"action": "accept", "src": ["tag:windows"], "dst": ["tag:linux:22"]},],"ssh": [{"action": "accept","src":    ["autogroup:member"],"dst":    ["tag:linux"],"users":  ["autogroup:nonroot", "root"],},{"action": "check","src":    ["group:admin"],"dst":    ["tag:linux", "tag:windows"],"users":  ["autogroup:nonroot", "root"],},],
}

2) 在 ubuntu 24 desktop 上启动 tailscale ssh

这行命令带有能数 --reset 重置，会清除现有主机上的 Tailscale 配置。

sudo tailscale up --accept-routes --advertise-tags=tag:linux --ssh --reset

解释：

为设备添加 linux 标签（--advertise-tags=tag:linux）
启用 SSH 功能（--ssh）
重置配置（--reset）
接受路由（--accept-routes），白话：接受来自其它 Tailscale 网络访问

c. 演示

安全审核过程略过...

Damm，竟然用浏览器，连接到我 Laptop 上的 Ubuntu VM.

ali 云上的日本机也ok

三、