虚拟机安装k8s集群

环境准备

- 主节点（Master Node）:

• IP地址: 192.168.40.100
• 主机名: k8s-master

- 工作节点（Worker Node）:

• IP地址: 192.168.40.101
• 主机名: k8s-node1

步骤 1: 配置虚拟机环境

1.1 设置主机名

在每台虚拟机上设置唯一的主机名：

#在主节点上执行
sudo hostnamectl set-hostname k8s-master

# 在工作节点上执行
sudo hostnamectl set-hostname k8s-node1

1.2 配置hosts文件

编辑/etc/hosts文件，添加所有节点的IP地址和主机名映射：

sudo vi /etc/hosts

添加如下内容：

192.168.40.100 k8s-master
192.168.40.101 k8s-node1

1.3 更新系统并安装依赖

sudo yum update -y
sudo yum install -y curl vim wget git

1.4 关闭防火墙和 SELinux

sudo systemctl stop firewalld
sudo systemctl disable firewalld
sudo setenforce 0
sudo sed -i 's/^SELINUX=enforcing/SELINUX=permissive/' /etc/selinux/config

1.5 禁用交换分区（Kubernetes 要求）

sudo swapoff -a
sudo sed -i '/swap/s/^\(.*\)$/#\1/g' /etc/fstab

1.6 配置网络转发和桥接

cat <<EOF | sudo tee /etc/modules-load.d/k8s.conf
br_netfilter
EOFcat <<EOF | sudo tee /etc/sysctl.d/k8s.conf
net.bridge.bridge-nf-call-ip6tables = 1
net.bridge.bridge-nf-call-iptables = 1
net.ipv4.ip_forward = 1
EOFsudo sysctl --system

步骤 2: 安装Containerd

2.1 安装Containerd

下载并安装Containerd：

# 下载 Containerd
wget https://github.com/containerd/containerd/releases/download/v1.7.0/containerd-1.7.0-linux-amd64.tar.gz# 解压文件
sudo tar Cxzvf /usr/local containerd-1.7.0-linux-amd64.tar.gz# 创建 systemd 服务文件
sudo mkdir -p /usr/local/lib/systemd/system
sudo curl -o /usr/local/lib/systemd/system/containerd.service https://raw.githubusercontent.com/containerd/containerd/main/containerd.service# 重新加载 systemd 配置
sudo systemctl daemon-reload# 启动并启用 Containerd
sudo systemctl enable containerd
sudo systemctl start containerdcontainerd --version

2.2 配置 Containerd

sudo mkdir -p /etc/containerd
containerd config default | sudo tee /etc/containerd/config.toml
sudo sed -i 's/SystemdCgroup = false/SystemdCgroup = true/' /etc/containerd/config.toml

2.3 安装 runc

runc 是容器技术的核心组件之一，它负责根据 OCI（Open Container Initiative）规范创建和运行容器
Docker、containerd 等均依赖 runc
为什么要安装替换runc？
因为原本的runc有问题，不能使用。需要重新安装并替换。

# 1、安装 libseccomp 
# 下载 libseccomp 源码包
wget https://github.com/seccomp/libseccomp/releases/download/v2.5.4/libseccomp-2.5.4.tar.gz# 解压文件
tar xf libseccomp-2.5.4.tar.gz# 进入解压后的目录
cd libseccomp-2.5.4# 安装依赖
sudo yum install gperf -y# 配置、编译并安装
./configure
make
sudo make install# 查找已安装的 libseccomp.so 文件
sudo find / -name "libseccomp.so"#2、安装runc
#下载并赋予执行权限
wget https://github.com/opencontainers/runc/releases/download/v1.1.5/runc.amd64
chmod +x runc.amd64
#查找现有 runc 的位置
which runc
备份现有的 runc 文件
#sudo mv /usr/local/sbin/runc /usr/local/sbin/runc.bak
#移动新版本的 runc 到目标位置
sudo mv runc.amd64 /usr/local/sbin/runc

2.4 启动并启用 Containerd

sudo systemctl restart containerd
sudo systemctl enable containerd

步骤 3: 安装Kubernetes组件

3.1 添加Kubernetes YUM仓库

# 创建 Kubernetes YUM 仓库文件
cat <<EOF | sudo tee /etc/yum.repos.d/kubernetes.repo
[kubernetes]
name=Kubernetes
baseurl=http://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=0
repo_gpgcheck=0
gpgkey=http://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg http://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg
exclude=kubelet kubeadm kubectl
EOF

3.2 安装kubeadm, kubelet, 和 kubectl

sudo yum install -y kubelet-1.28.2 kubeadm-1.28.2 kubectl-1.28.2 --disableexcludes=kubernetes

3.3启动并启用 kubelet

sudo systemctl enable --now kubelet

步骤 4: 初始化集群

4.1 在主节点上初始化集群

在主节点（k8s-master）上运行以下命令来初始化Kubernetes集群：
192.168.0.0/16 是 calico 网络插件的默认ip池，如果要用calico网络插件这个地方需要写成 192.168.0.0/16
ps：理论上这个地方的ip段可以任意写（只要不和虚拟主机的网段重复就可以），但是必须和calico网络插件的配置保持一致。对于高手来讲也可以去改calico配置，然后两边保持一致就好。我是菜鸟，就先不改了。
如果使用其他的网络插件，这个地方可能不一样，要根据具体网络插件来写。

kubeadm reset
sudo kubeadm init --pod-network-cidr=192.168.0.0/16

如果成功，你会看到类似如下的输出：
一般情况下，如果上述服务器配置和各组件的版本对的话，这一步应该都能成功

Your Kubernetes control-plane has initialized successfully!To start using your cluster, you need to run the following as a regular user:mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/configAlternatively, if you are the root user, you can run:export KUBECONFIG=/etc/kubernetes/admin.confYou should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:https://kubernetes.io/docs/concepts/cluster-administration/addons/Then you can join any number of worker nodes by running the following on each as root:kubeadm join 192.168.40.100:6443 --token d2j2ew.qmgrhops9sw5jubp \--discovery-token-ca-cert-hash sha256:9a2b7e5427e94c5453bc498c7ef35362fda97e6719f1fefcef72f52db2297b07 

4.2 配置kubectl

按照输出中的指示，配置kubectl：

  mkdir -p $HOME/.kubesudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/configsudo chown $(id -u):$(id -g) $HOME/.kube/config

4.3 验证

查看nodes

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS   ROLES           AGE    VERSION
k8s-master   Ready    control-plane   102s   v1.28.2

查看pods

[root@k8s-master ~]# kubectl get pod  -A
NAMESPACE     NAME                                 READY   STATUS              RESTARTS   AGE
kube-system   coredns-5dd5756b68-cx54x             0/1     ContainerCreating   0          16s
kube-system   coredns-5dd5756b68-tp4qc             0/1     ContainerCreating   0          16s
kube-system   etcd-k8s-master                      1/1     Running             6          28s
kube-system   kube-apiserver-k8s-master            1/1     Running             6          31s
kube-system   kube-controller-manager-k8s-master   1/1     Running             6          28s
kube-system   kube-proxy-9cwrj                     1/1     Running             0          16s
kube-system   kube-scheduler-k8s-master            1/1     Running             6          28s

步骤 5: 配置Pod网络

选择并部署一个Pod网络插件。这里以calico为例：
这个yml地址需要链接外网VPN，因为我在国内没找到合适的版本地址

kubectl apply -f https://docs.projectcalico.org/v3.25/manifests/calico.yaml

再次查看pods 多了 calico-kube-controllers 和 calico-node 并且 coredns 也启动起来了

[root@k8s-master ~]# kubectl get pod  -A
NAMESPACE     NAME                                       READY   STATUS    RESTARTS   AGE
kube-system   calico-kube-controllers-658d97c59c-c84l7   1/1     Running   0          25s
kube-system   calico-node-cnzm9                          1/1     Running   0          25s
kube-system   coredns-5dd5756b68-cx54x                   1/1     Running   0          3m9s
kube-system   coredns-5dd5756b68-tp4qc                   1/1     Running   0          3m9s
kube-system   etcd-k8s-master                            1/1     Running   6          3m21s
kube-system   kube-apiserver-k8s-master                  1/1     Running   6          3m24s
kube-system   kube-controller-manager-k8s-master         1/1     Running   6          3m21s
kube-system   kube-proxy-9cwrj                           1/1     Running   0          3m9s
kube-system   kube-scheduler-k8s-master                  1/1     Running   6          3m21s

步骤 6: 加入工作节点

6.1 安装操作

在工作节点（k8s-node1）上运行加入命令。使用从主节点初始化时生成的kubeadm join命令加入集群。例如：

kubeadm join 192.168.40.100:6443 --token d2j2ew.qmgrhops9sw5jubp \--discovery-token-ca-cert-hash sha256:9a2b7e5427e94c5453bc498c7ef35362fda97e6719f1fefcef72f52db2297b07

如果出现以下信息说明woker 节点加入成功

This node has joined the cluster:
* Certificate signing request was sent to apiserver and a response was received.
* The Kubelet was informed of the new secure connection details.Run 'kubectl get nodes' on the control-plane to see this node join the cluster.

再次查看 nodes 和pods

[root@k8s-master ~]# kubectl get nodes
NAME         STATUS   ROLES           AGE    VERSION
k8s-master   Ready    control-plane   7m3s   v1.28.2
k8s-node1    Ready    <none>          57s    v1.28.2

[root@k8s-master ~]# kubectl get pod  -A
NAMESPACE     NAME                                       READY   STATUS    RESTARTS   AGE
kube-system   calico-kube-controllers-658d97c59c-c84l7   1/1     Running   0          4m40s
kube-system   calico-node-cnzm9                          1/1     Running   0          4m40s
kube-system   calico-node-hx56t                          1/1     Running   0          94s
kube-system   coredns-5dd5756b68-cx54x                   1/1     Running   0          7m24s
kube-system   coredns-5dd5756b68-tp4qc                   1/1     Running   0          7m24s
kube-system   etcd-k8s-master                            1/1     Running   6          7m36s
kube-system   kube-apiserver-k8s-master                  1/1     Running   6          7m39s
kube-system   kube-controller-manager-k8s-master         1/1     Running   6          7m36s
kube-system   kube-proxy-9cwrj                           1/1     Running   0          7m24s
kube-system   kube-proxy-rkf7v                           1/1     Running   0          94s
kube-system   kube-scheduler-k8s-master                  1/1     Running   6          7m36s

6.2 问题解决

我在操作join时，worker节点始终无法加入集群（卡到下面这个地方不动）

[root@k8s-node1 /]# kubeadm join 192.168.40.100:6443 --token ovg3gc.aaoioxvzi495tw9k \
>         --discovery-token-ca-cert-hash sha256:b803cb2421fc6ea3f02669c0f86a031607aee6ac7bc8a466edf247aa3960a314
[preflight] Running pre-flight checks

查看日志发现 mastor节点的 6443 端口 和 179 端口从 worker节点访问不到。
mastor节点的 6443 端口和179端口从 mastor节点能访问到
mastor节点的ip和域名从 worker节点可以ping通
在mastor节点执行以下命令解决

sudo iptables -I INPUT 1 -p tcp --dport 179 -j ACCEPT
sudo iptables -I INPUT 1 -p tcp --dport 6443 -j ACCEPT

为了使上述配置在服务器重启后仍然生效， 需要将 iptables 规则 持久化

# 安装 iptables-services
sudo yum install iptables-services -y# 添加规则
sudo iptables -I INPUT 1 -p tcp --dport 179 -j ACCEPT
sudo iptables -I INPUT 1 -p tcp --dport 6443 -j ACCEPT# 保存规则
sudo service iptables save
# 或者
sudo iptables-save | sudo tee /etc/sysconfig/iptables# 启动并启用 iptables 服务
sudo systemctl start iptables
sudo systemctl enable iptables# 检查状态
sudo systemctl status iptables
sudo iptables -L -v